Champion Power Equipment PP-3 Manual do Utilizador descarregar pdf (Página 57)

MAINTENANCE

¾ Remove the old controller and install the new one.

¾ Install the five retainers “C”.

¾ Connect the three plugs “B”.

¾ Connect the four Plugs “A”

¾ Close the hinged panel and replace the two fasteners.

¾ Turn on Power.

Replacing Pump

¾ Turn off and lockout the incoming

power to the control panel.

¾ Disconnect the electrical plug by

removing the retainer and pulling out

the plug.

Plug

¾ Loosen the three hose clamps and

remove the three hoses “A”.

¾ Remove the four bolts

from base of pump “B"

¾ Replace pump with

new pump.

¾ Install the four bolts at

base of pump “B”.

¾ Reconnect and tighten

the three hoses “A”.

¾ Reconnect the electrical

plug.

¾ Turn power back on.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 66 67

Sem comentários

Champion Power Equipment PP-3 Manual do Utilizador Página 57